Cables and connections, which are mostly made of copper and coated, are used for autogons and are used in automation and resistance welding stations.

The cable (connection) of the air conditioner is boiling point

This connection is mainly used in autogans and automation stations, and depending on the customer's request, it is produced from 100 MCM to 1200 MCM cross section. Different types of cable terminal form can be provided depending on the standard and customer request.

In order to increase the flexibility of the cable, various sizes of wires can be used according to the request.

Boiling point cooling water cable (connection)

These joints generally have a higher life than air-conditioned joints and can be provided in various cross-sections and lengths. In these models, when ordering, the length, cross-sectional area (MCM), the shape of the heads and the degree of flexibility of the cables are required.

Cable (connection) Kickless welding point (separate gun transformer device)

In this cable, both poles of the transformer are placed together so that the lateral forces created in the cable connected to each pole neutralize each other to a large extent. As a result, the impact caused by the passage of current in the cable is greatly reduced.
This connection is usually used in isolated transformers.
Kikless cables proposed by Navin Pardazan are at a very suitable level in terms of electrical conductivity and cooling flow, which leads to an increase in the life of the cable.